Transfastener Attachment DevicesGeneral Information For use with MSA Latchways engineered horizontal lifeline systems Attach karabiner directly to harness front connection point. Do not increase the supplied connector lengthby interlocking additional karabiners.

85080-00, Standard Attachment and removal of the Standard Transfastener from thesystem is via an entry terminal P/No’s. (85020-00 standard)(85090-00, 85260-00 85262-00 & 85551-00 screw-gate type)

85085-00, Removable Removable Transfastener can be attached at any point in thesystem without the need of entry/exit components. Attachment requires the gate to be positioned to one side: insertingthe cable between the starwheels & locating the cable in the bodyrecess; sliding gate to opposite side & withdrawing the cable fromthe body recess allowing the cable to locate on the underside ofthe slipper, between the starwheels. Secure the Transfastener byfitting the karabiner through the gate & body Always ensure the gate and the body are in the closed position &secured by the karabiner with a minimum width / diameter of 10.0mm before use.