STANDARD /มาตรฐาน

Operating instructions / ขั้นตอนและคำแนะนำการใช้งาน

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, thiazoles and dithiocarbamates to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL  in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

• in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc...) : rub over with a dry cloth
• in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation / เอกสารแนบสำหรับประกอบการพิจารณา

Video / วีดีโอ

Item Code

ID CODE : 02-6507